Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 146 / 445

Share

Page: 146 / 445

Cadillac CT62018 Owner'S Manual Download Page 146

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

145

Service Vehicle Soon Light
(PLUG-IN Only)

This light comes on if a condition
exists with the propulsion system.

If the light comes on, take the vehicle
to your dealer for service as soon as
possible.

Brake System Warning
Light

The vehicle brake system consists of
two hydraulic circuits. If one circuit is
not working, the remaining circuit can
still work to stop the vehicle. For
normal braking performance, both
circuits need to be working.

If the warning light comes on, there is
a brake problem. Have the brake
system inspected right away.

Metric

English

This light should come on briefly
when the engine is started. If it does
not come on then, have it fixed so it
will be ready to warn you if there is a
problem.

If the light comes on and stays on,
there is a brake problem.

{

Warning

The brake system might not be
working properly if the brake
system warning light is on. Driving
with the brake system warning light
on can lead to a crash. If the light is
still on after the vehicle has been
pulled off the road and carefully
stopped, have the vehicle towed for
service.

Electric Parking Brake
Light

Metric

English

This light comes on when the parking
brake is applied. If the light continues
flashing after the parking brake is
released, or while driving, there is a
problem with the Electric Parking
Brake system or another system.
A message may also display in the
Driver Information Center (DIC).

If the light does not come on,
or remains flashing, see your dealer.

«
...
144
145
146
147
148
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments