Cadillac CT62018 Owner'S Manual Download

Page: 69 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

SEATS AND RESTRAINTS

Uplevel Lumbar and Upper Back
Support Adjustment

If equipped, the ignition must be on
to use all uplevel seat features.

Platinum Seat

1. Feature Select
2. Up
3. Forward
4. Down
5. Rearward

1. To adjust lumbar support,

if equipped: Toggle the Feature
Select (1) to view adjustable seat
options on the infotainment
display.

2. Select lumbar support.

Press Up (2) to move lumbar
support upward.

Press Forward (3) to move
lumbar support forward.

Press Down (4) to move
lumbar support down.

Press Rearward (5) to move
lumbar support rearward.

To adjust upper back support,
if equipped:

1. Toggle the Feature Select (1) to

view adjustable seat options on
the infotainment display.

2. Select Upper Back Support.

3. Press Forward (3) to move

support forward or Rearward (5)
to move support rearward.

Thigh Support Adjustment

To adjust thigh support, if equipped:

1. Toggle the Feature Select (3) to

view adjustable seat options on
the infotainment display.

2. Select cushion length adjuster.

3. Press and hold the control

forward (2) to increase or
rearward (1) to decrease cushion
length.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Related manuals for CT62018

Brands by name

Popular brands

Cadillac CT62018, Owner'S Manual

Search results

Summary of Contents for CT62018

Reviews:

Related manuals for CT62018

Brands by name

Popular brands