Buffalo terastation 3000, User Manual

Page: 92 / 232

Type Files included
Management backup
Each time a backup is executed, management information is stored, and
only files that have changed are copied or deleted. Data is retrieved from the
previous backup file for files that were not changed. This is useful for making
backups with limited space or for referencing status at a particular point in
time (for use for data snapshot applications). The destination folder for a
management backup should be a local folder on this TeraStation or on a USB
drive attached to it. The destination folder will be set to read-only. Do not use
folders from drives formatted with FAT.
You can specify how many backup versions to keep from 1–400, or select
“Unlimited” to keep all backups until the drive is full. The backup destination
folder should be on the same TeraStation that the backup job is configured
from, or on an external USB drive attached to that TeraStation.
Backup Logs
The following backup error codes may be recorded in the backup log. Read the description and try the respective
corrective actions for each error.
Code Description Corrective Action Log Example
Code 3
The backup destination USB
drive could not be found.
Check that the backup destination
USB drive is connected to the
TeraStation properly.
rsync error: errors
selecting input/
output files, dirs (code
3) at main.c(634)
[Receiver=3.1.0]
Can’t write to backup
destination(target
disk is broken?).
Code 5
The backup destination shared
folder could not be found.
Check that the Ethernet cable is
securely connected and that the hub
or other devices on the network are
turned on. rsync error: error
starting client-server
protocol (code 5) at
main.c(1504)
Code 10
The Ethernet cable was
disconnected from the backup
source TeraStation when the
backup job started.
Reconnect the Ethernet cable.
rsync error: error in
socket IO (code 10)
at clientserver.c(128)
[sender=3.1.0pre1]
Code 11
The drive capacity of the
backup destination TeraStation
became full.
Delete unnecessary files and folders.
rsync error: error
in file IO (code 11)
at receiver.c(389)
[receiver=3.1.0]
Code 12
Could not communicate
between backup source and
destination TeraStations.
Check that the Ethernet cable is
securely connected and that the hub
or other devices on the network are
turned on.
rsync error: error in
rsync protocol data
stream (code 12) at
io.c(515)
The settings of the TeraStation
were changed while the
backup job was running.
Do not change the settings while the
backup job is running. If changed, the
connection is temporarily terminated
and the backup job will fail.
91