LCD Message
Description
Corrective Action
I36 Drive
x
Decryption Error
The media cartridge cannot be decrypted.
The media cartridge may have been
encrypted by a TeraStation other than this
product.
Connect the drive to the TeraStation that
performs encryption to decrypt the drive.
I37 Recovering
System…
System recovery in progress.
-
I38 Recovery
Finished
System recovery is complete.
-
I39 Change Boot
Switch Back
System recovery from the USB recovery
device is complete.
Change the boot mode switch on the rear
to “HDD”.
I40 All Data Will Be
Deleted
Beginning recovery. All data on the drive
will be deleted.
-
I41 Push Func to
Start Recovery
Press the function button on the front to
start the recovery process.
-
I42 Preparing
Recovery
Preparing to start the recovery process.
-
I43 Unsupported
Hardware
The TeraStation was started from the USB
recovery device, but the system cannot be
recovered from this USB recovery device.
-
I44 Drive 1 Not
Found
Recovery from the USB recovery device
was initiated, but drive 1 was not detected.
Make sure that drive 1 is present and fully
inserted in its slot.
I45 Recovery Failed
Recovery failed.
-
I46 Migrating RAID
Array
x
...
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the TeraStation’s power.
I47 Don’t Power Off
System!
I48 Push Func to
Start Failover
This TeraStation is ready to become the
failover backup for the main TeraStation.
Hold down the function button on the
front of the target TeraStation until it stops
beeping to accept failover backup status.
I49 Lost Failover
Main
The main TeraStation in the failover
configuration cannot be found.
Make sure that the main TeraStation is on,
working, and connected to the network.
I50 Failover in
Maintenance Mode
Failover maintenance is in progress.
Do not turn off the TeraStation’s power.
I51 Initializing
Failover…
Initializing the failover configuration.
Do not turn off the TeraStation’s power.
I52 New Firmware
Available
A new firmware version has been released.
Update the firmware.
I54 Backup Job
xx
Failed
The backup job failed.
Make sure that the backup job is
configured correctly. Make sure that the
NAS is on and not in standby mode. If the
backup job still fails, check the status of
NAS, network, and backup source and
destinations.
I55 Recovery Not
Authorized
Authentication during recovery of settings
failed.
Settings can only be restored for the
TeraStation whose settings were originally
saved. To restore settings, insert the USB
memory device, move the Boot Mode
switch on the rear of the TeraStation to the
USB position, and restart the TeraStation.
Or, settings can be restored from Settings
with the TeraStation powered on.
223
Summary of Contents for terastation 3000
