Buffalo terastation 3000, User Manual

Page: 112 / 232

Copying from a USB Device
Use Direct Copy to copy from a USB device directly to the TeraStation.
Note: To use Direct Copy, connect only one USB device at a time.
Supported Devices:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
1
From Settings, click Backup .
2
Move the Direct Copy switch to the position to enable Direct Copy.
3
Connect the USB device. When it mounts (about 10 seconds), the function button will light up.
Note: Unsupported devices will not cause the function LED to light.
4
You now have 60 seconds to press and hold the function button for 3 seconds. If you do, the function button
will flash as all the files on the USB device are copied to the Direct Copy folder of the TeraStation.
Notes:
• While the function button is flashing, press and release it quickly to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files in the digital camera are copied.
• To change the Direct Copy target folder, navigate to
Backup > Direct Copy > Edit , select a new folder, and
click OK .
5
When the copy operation is finished, the access LED of the USB device will stop flashing. Dismount the USB
device from the TeraStation referring to the “Dismounting Drives” section in chapter 4.
111