Buffalo terastation 3000, User Manual

Page: 196 / 232

4
Select “Save current configuration to a USB drive”.
5
From “Target USB drive”, select the USB drive that is connected to the USB 2.0 port on the TeraStation, then
click
Execute .
6
The “Confirm Operation” screen will open. Enter the confirmation number, then click OK .
7
The TeraStation will save the settings. When saving settings is completed, click OK .
Dismount the USB drive before unplugging it. See the “Dismounting Drives” section in chapter 4 for the procedure
on dismounting drives.
Troubleshooting:
If the settings are not saved to the USB drive successfully, you may receive an error message such as “The specified
operation cannot be executed.”. Verify:
• The USB drive is connected to a USB 2.0 port, not a USB 3.0 port.
• The USB drive has a capacity of 1 GB or larger.
• The USB drive is not write-protected.
Applying Settings
The saved settings can be applied to a different TeraStation of the same series. If applying settings to another
TeraStation, the unit’s current firmware version will be changed to the version used to save the settings.
1
Insert the USB drive with the saved settings to a USB 2.0 port on the TeraStation.
2
From Settings, click Management .
3
Click to the right of “Configuration Management”.
195