Buffalo LinkStation LS-CHL User Manual Download Page 57

Page: 57 / 214

Using your LinkStation

LinkStation User Manual

Configure your FTP client software with the following settings:

• Host Name

IP address of the LinkStation.

• Username

Username registered on the LinkStation

• Password

Password registered to the LinkStation

• Port

Example ftp://192.168.11.150/

• You cannot write by FTP if the shared folder is set to read-only on the LinkStation.

• Access restrictions are applied based on the settings in the LinkStation. The restrictions

are not displayed for users without permissions for the share.

• To access your FTP share from outside of your network, you may need to configure your

router and firewall. Consult your router documentation for more information.

• Shared folders appear as follows when connected by FTP:

- disk1 share

- usbdisk1

- info

• The internal hard drive of the LinkStation is displayed as disk1, and a USB hard drive

(optional) will be displayed as usbdisk1.

• "usbdisk1" is not displayed when the USB hard drive is not connected, or if access is

restricted.

To access to the LinkStation with an FTP client

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands