Buffalo LinkStation LS-CHL User Manual Download Page 198

Page: 198 / 214

LinkStation User Manual

197

Appendix

I26

Initializing all settings in the Web Admin interface.

I27

Checking a USB hard drive.

I28

Formatting a USB hard drive.

I32

The RAID should be rebuilt or a drive should be formatted. Normally this is

displayed after a hard drive has been replaced. Rebuild the RAID array or

format the hard drive in the Web Admin interface.

I46

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

I47

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands