Buffalo LinkStation LS-CHL User Manual Download Page 34

Page: 34 / 214

Using your LinkStation

LinkStation User Manual

Note:

The Web Admin interface is compatible with Internet Explorer 6.0 Service Pack 2 or later, Firefox

1.5 or later, and Safari 3 or later.

The Web Admin interface contains the following sections.

The Web Admin interface opens. The LinkStation’s

name, IP address, workgroup and hard disk

information are displayed on the left side of the

window.

• [Shared Folders]

Add/delete shared folders, set access restrictions, and configure direct copy.

• [Users/Groups]

• [Network]

• [System]

Configure name, time, disk check format, backup, mail notification settings, timers, UPS

synchronization settings, initialization, and format drives.

• [Extensions]

Configure WebAccess, Media Server, Print Server, BitTorrent, Time Machine and Web Service

Support.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands