Buffalo LinkStation LS-CHL User Manual Download Page 144

Page: 144 / 214

LinkStation User Manual

143

Chapter 3
NAS Navigator2

NAS Navigator2 is a utility program that makes it simple to display the Web Admin interface, change
its IP address or check its hard drive.

Windows

If you set up the LinkStation with the LinkNavigator CD, NAS Navigator2 is installed and configured

to run automatically in the system tray at startup.

You can launch NAS Navigator2 in either of the following ways:

• Double-click the

icon on the desktop.

• Click [Start] - [(All) Programs] - [BUFFALO] - [BUFFALO NAS Navigator2]-[BUFFALO NAS Navigator2].

Screen:

Clicking a LinkStation's icon will display its total capacity, capacity being used, [IP Address],

[Workgroup], [Subnet Mask], [Default Gateway], [MAC Address], and [Firmware] version.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands