LinkStation User Manual
194
Appendix
Power LED flashing amber
The Power LED flashes amber with information codes. The way it flashes indicates the message.
Note:
If the Power LED is flashing amber, you can open NAS Navigator2. It will tell you the status of the
LinkStation.
Power LED glowing amber
When new firmware is available, the power LED will glow amber. Update the firmware as described
on page 112.
Place
Status
10s place
The LED illuminates for 1.0 second every 0.3 seconds.
The number of flashes is the tens place of the information code.
1s place
The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of flashes is the ones place of the information code.
Information codes
Descriptions
I10
System temperature may have exceeded the maximum safe value. Move
the LinkStation to a cooler location. Do not place objects in the area around
the LinkStation.
I11
The bad sectors in the hard drive may have reached a dangerous level.
I20
Checking the hard drive.
I21
Checking the hard drive.
I22
Erasing hard drive data.
I25
Updating the LinkStation firmware.
Do not turn off the power during the updating process.
I26
Initializing all settings in the Web Admin interface.
I27
Checking a USB hard drive.
I28
Formatting a USB hard drive.
