manualshive.com logo in svg

Buffalo LinkStation LS-CHL, User Manual, Page: 115 / 214

Share
Download
Buffalo LinkStation LS-CHL User Manual Download Page 115

Using your LinkStation

LinkStation User Manual

114

Network-USB Server

A Network-USB server lets you connect to USB devices attached to a LinkStation from multiple 

computers. Only one computer can be connected to each USB device at one time.

Before connecting a USB device to your LinkStation, first connect it directly to your computer so that 

the driver is installed.

Notes:

•  Not all LinkStations support Network-USB Server.  Check the LinkStation Function List on page 35 

to see if your LinkStation supports Network-USB Server.

•  For a list of compatible USB devices that can be connected with the Network-USB server,  

see www.buffalotech.com.

•  While the Network-USB server is enabled, the following devices and functions will not be able to 

use the USB port:

- USB hard drives

- Print server

- USB UPS connection

- DirectCopy

•  Maximum number of connectable USB devices: 15 (not including one USB hub). The number of 

connectable devices may vary depending on the customer’s operating environment.

•  If a device is recognized as multiple USB devices, the maximum number of connectable devices is 

reduced.

•  Only one USB hub can be connected.

1

2

Next, follow the procedure on the next page to install Network-USB Navigator.

1

  Select [Enable].

2 

Click [Save].

In the Web Admin interface, navigate to [Extensions] 

- [Network-USB Server] - [Modify Settings].

Summary of Contents for LinkStation LS-CHL























































































































































































































Reviews:

No comments