Buffalo LinkStation LS-CHL User Manual Download Page 208

Page: 208 / 214

LinkStation User Manual

207

Appendix

Status LED 1~4

Status LED 2

Status LED 3

Status LED 1

Status LED 4

Status

Descriptions

Glowing green

Normal state. This flashes during access.

Glowing red

An error occurred in the hard drive. Replace the hard drive indicated

by the drive number that is lit red.

I21

Checking the hard drive.

I22

Erasing the data for the hard drive.

I25

Updating the LinkStation firmware. Do not turn off the power during the

updating process.

I26

Initializing all settings in the Web Admin interface.

I27

Checking a USB hard drive.

I28

Formatting a USB hard drive.

I32

The RAID should be rebuilt or a drive should be formatted. Normally this is

displayed after a hard drive has been replaced. Rebuild the RAID array or

format the hard drive in the Web Admin interface.

I46

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

I47

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

Power LED glowing amber

When new firmware is available, the power LED will glow amber. Update the firmware as described

on page 112.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands