Buffalo LinkStation LS-CHL User Manual Download Page 204

Page: 204 / 214

LinkStation User Manual

203

Appendix

Power LED

Status

Descriptions

Glowing Blue

The LinkStation is powered on.

Blinking blue

The LinkStation is starting up or shutting down.

Off

The LinkStation is off.

E14

The RAID array cannot be mounted. Run the RAID array disk check in the

LinkStation's Web Admin interface.

E15

The bad sectors in the hard drive have reached a dangerous level. Contact Buffalo

technical support for assistance.

E16

Unable to find the hard drive. Hard drive may be disconnected or may have failed.

Contact Buffalo technical support for assistance.

E22

Mounting of hard drive failed. Format the hard drive. After formatting, if the error

still appears after rebooting, contact Buffalo technical support for assistance.

E23

An error occurred, so the hard drive was removed from the RAID array. Contact

Buffalo technical support for assistance.

E30

The hard drive may be damaged. Contact Buffalo technical support for assistance.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands