Buffalo LinkStation LS-CHL User Manual Download Page 27

Page: 27 / 214

Using your LinkStation

LinkStation User Manual

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.

Notes:

• If LinkNavigator does not open, open the Utility CD and double-click [LSNavi.exe].

• If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.exe].

• If “Do you want to allow the following program to make changes to this computer ?”is

displayed in Windows 7, please click [Yes].

• If “A program needs your permission to continue” is displayed in Windows Vista, please click

[Continue].

• For Mac OS, double-click on the LinkNavigator icon in the utility CD.

Follow the instruction on the screen to install NAS Navigator2.

After NAS Navigator2 is installed, click at the top right top of the installer window to close it.

Opening the shared folder from another PC

After the LinkStation is installed on one computer, you don’t have to go through the full installation

to add a second computer. Just install NAS Navigator2 on each additional computer to access the

LinkStation.

Click [Options] - [Additional Software Installation].
For Mac OS, click [Install NAS Navigator].

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands