Buffalo LinkStation LS-CHL User Manual Download Page 141

Page: 141 / 214

Using your LinkStation

LinkStation User Manual

140

Notes:

• Video files are not copied to the LinkStation.

• Only JPEG images are copied.

• In step 7, if the LinkStation is not set as the Destination, images will not be transferred to the

LinkStation.

• After a picture is taken, it may take some time for it to be transferred to the LinkStation.

• A USB drive connected to the LinkStation cannot be specified as the target folder.

• If a subfolder to the main shared folder is specified as the Destination, the subfolder name must be

in single-byte alphanumeric characters. Subfolders with names in multi-byte characters cannot be

used.

• When the LinkStation firmware is updated, the Destination is initialized. Reset the Destination

before using Eye-Fi.

• Photos will be transferred to the Destination share even if it is set to Read-only.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands