Buffalo LinkStation LS-CHL, User Manual, Page: 164 / 214

Chapter 4 Web Admin interface
LinkStation User Manual 163
System
The following options can be set from the [System] tab.
Name Descriptions
Settings
Name
Click [Modify
Settings]
to change
settings.
LinkStation
Name
Enter a name to identify the LinkStation on the network. Names may
contain up to 15 bytes(UTF-8). Alphanumeric characters, hyphens, and
underscores may be used. Do not use multi-byte characters. Do not
use a symbol as the first character of the name.
Description Descriptions may contain up to 75 bytes(UTF-8). Alphanumeric
characters, multi-byte characters, hyphens, underscores and spaces
may be used.
Descriptions are only displayed in Windows. They will not be displayed
on a Macintosh.
Date and Time
Click [Modify
Settings]
to change
settings.
Date/Time
Source
Select [Automatic] to use an NTP to correct system time automatically.
Select [Manual] to set time manually.
Primary NTP IP
Address
Enter the DNS name or the IP address of an NTP server. You may user
ntp.jst.mfeed.ad.jp or 192.168.11.123, for example.
To specify ntp.jst.mfeed.ad.jp as the NTP server, select [Use default NTP
server (ntp.jst.mfeed.ad.jp)].
NTP
Synchronization
Frequency
You may have NPT correct your system time [Daily], [Weekly], or [Every
3 hours].
When accessing an NTP server through a proxy server, access to
an NTP server outside the proxy server may fail in certain network
environments.
Time Zone Specify Time Zone.
Date Displays year, month and date. Enter numbers to change these values.
Time Displays time. Enter numbers to change the value manually. Click [Use
Local Date/Time] to obtain time and time zone from the internal clock
of your computer.
Note: If system clocks on your network get more than 5 minutes off
from each other, it may cause problems with your network. For best
results, use an NTP server to automatically set the system time for all of
your network devices, including the LinkStation.
Language
Click [Modify
Settings]
to change
settings.
Display
Language
Select the language to be displayed.
Windows Client
Language
Select the language to be used in the Windows client.