Buffalo LinkStation LS-CHL User Manual Download Page 210

Page: 210 / 214

LinkStation User Manual

209

Appendix

Status LED (LS-XL)

When the AC adapter is connected, the power LED will glow blue.

The LED turns off when the power is turned off.

The LED will blink blue during startup and during the firmware

update process.

Notes:

• Do not disconnect the AC adapter while the LED is flashing or glowing. This could cause a device

failure. The AC adapter can be disconnected when the LED is off.

• When updating the firmware, the power LED will blink as shown below.

A pattern of two 1-second (long) flashes followed by five 0.5-second (short) flashes is repeated.

• NAS Navigator2 displays the LinkStation error and information below.

Error code Descriptions

E15

The bad sectors in the hard drive have reached a dangerous level. Contact Buffalo

technical support for assistance.

E22

Mounting of hard drive failed. Format the hard drive. After formatting, if the error

still appears after rebooting, contact Buffalo technical support for assistance.

E30

The hard drive may be damaged. Contact Buffalo technical support for assistance.

Information code

Descriptions

I11

The bad sectors in the hard drive may have reached a dangerous level.

Replace the hard drive.

I20

Checking the hard drive.

I21

Checking the hard drive.

I22

Erasing the data for the hard drive.

I25

Updating the LinkStation firmware. Do not turn off the power during the

updating process.

I26

Initializing all settings in the Web Admin interface.

I52

A new firmware version has been released. Update the firmware.

Power LED

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands