Buffalo LinkStation LS-CHL User Manual Download Page 103

Page: 103 / 214

Using your LinkStation

LinkStation User Manual

102

RAID Scanning

LinkStations that are in RAID 1, RAID 5, RAID 10 modes support RAID scanning. A RAID scan tests the

RAID array for read performance. If defective sectors are found, they are repaired automatically. If

your multiple-drive LinkStation is in RAID 1 mode, you should run RAID scans regularly. Configure

regular RAID scans as follows:

Note:

Not all LinkStations support RAID scanning. Check the LinkStation Function List on page 35 to see if
your LinkStation supports RAID scanning.

Notes:

• Check [Shutdown] to automatically shut down the LinkStation whenever a RAID error occurs.

Check [Begin Immediate RAID Scan] to initiate an immediate RAID scan.

• To stop a RAID scan, click [Abort RAID Scanning].

• Single-drive LinkStations do not support RAID arrays or RAID scanning.

RAID Scanning is now configured.

Choose [Enable], enter your desired schedule,

and click [Save].

Navigate to [System] - [Storage] - [RAID

Scanning] in the Web Admin interface. Under

[RAID Scanning], click [Modify Settings].

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands