Chapter1 Setup
LinkStation User Manual
12
LinkNavigator Setup (LS-QVL)
1
Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power
cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub,
or switch on your network. The Ethernet cable will “click” and lock in place when inserted
properly.
2
Hold down the power button on the front of the LinkStation for one second. The blue Power
LED will blink as the LinkStation boots. When the LinkStation is ready, the LED will stop blinking
and glow steadily.
Note:
The power mode switch on the rear should be set to Manual,
not Auto. The Auto position will be usable after initial setup is
complete.
3
Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.
Click [Begin Installation]. The wizard will guide you through installation.
If LinkNavigator does not launch automatically, open the
Utility CD and double-click [LSNavi.exe].
LinkStation
Power button
Power LED
