LinkStation User Manual
206
Appendix
Power LED flashing amber
The Power LED flashes amber with information codes. The way it flashes indicates the message.
Note:
If the Power LED is flashing amber, you can open NAS Navigator2. It will tell you the status of the
LinkStation.
Place
Status
10s place
The LED illuminates for 1.0 second every 0.3 seconds.
The number of flashes is the tens place of the information code.
1s place
The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of flashes is the ones place of the information code.
Information code
Descriptions
I10
System temperature has exceeded the maximum safe value. Move the
LinkStation to a cooler location. Do not place objects in the area around the
LinkStation.
I11
The bad sectors in the hard drive may have reached a dangerous level.
Replace the hard drive.
I12
Operating in degraded mode.
I13
Formatting the RAID array.
I14
Checking the RAID array.
I15
Examining the error status of the RAID array. Transfer speeds are slower
during the examination process.
I16
Creating the RAID array.
I17
Resyncing the RAID array. Transfer speeds are slower during the resyncing
process.
I18
Rebuilding the RAID array. Transfer speeds are slower during the rebuilding
process.
I19
Writing 0s to the RAID array, erasing all data.
I20
Checking the hard drive.
Power LED