Buffalo LinkStation LS-CHL User Manual Download Page 196

Page: 196 / 214

LinkStation User Manual

195

Appendix

Status LED (LS-WVL, LS-WXL)

There are 5 LEDs on the LinkStation: “Power”, “Function”, “Info/Error”, “Link/Act”, and “AC adaptor”.

Function LED

Status

Descriptions

Glowing Blue

DirectCopy is ready (lights for 1 minute).

USB device is dismounted (lights for 5 seconds).

Initialization is in progress.

Blinking Blue

DirectCopy is in use.

Note:

The function LED (blue) and the info/error LED (orange) blink together

if an error occurs during DirectCopy. Please do the following if this

happens:.

1. Shut down the LinkStation .

2. Detach the USB device from the LinkStation.

3. Reattach the USB device to the LinkStation.

4. Power on the LinkStation.

Power LED

Status

Descriptions

Glowing Blue

The LinkStation is powered on.

Blinking Blue

The LinkStation is starting up or shutting down.

LED is off

The LinkStation is off.

Power LED

Function LED

Info/Error LED

Link/Act LED

AC adaptor LED

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands