Chapter 4 Web Admin interface
LinkStation User Manual
168
Name
Descriptions
Storage
If many recoverable errors (bad cluster) are found in one of the hard
drives which builds RAID, that drive will be removed and the system will
automatically move to degrade mode.
Since the data is not protected in the degrade mode, it is strongly
recommended to replace the erroneous hard drive immediately.
When running RAID Scanning in the first time, it is strongly recommended to
backup data on the LinkStation in advance.
[RAID Scanning]:
Set whether using RAID Scanning or not.
[RAID Scanning Schedule]:
Select the schedule to perform RAID Scanning.
• [Every Week], select from [Sunday] to [Saturday]
• [1st], from [Sunday] to [Saturday]
• [2nd], from [Sunday] to [Saturday]
• [3rd], from [Sunday] to [Saturday]
• [4th], from [Sunday] to [Saturday]
• [1st, 3rd], from [Sunday] to [Saturday]
• [2nd, 4th], from [Sunday] to [Saturday]
• [Every 1st day / month]
Select [Begin Immediate RAID Scan]] and click [Save] to immediately run the
maintenance.
[RAID Scanning Start Time]:
Select time to start RAID from 0 to 23 o’clock.
Click [Abort RAID Scanning] to stop the operation.
Backup
View NAS
Devices
Local
LinkStations
Displays LinkStations and TeraStations on the network with shares enabled
for backup.
Click [Refresh] to update the list.
Off Subnet
LinkStations
You can add an off-subnet LinkStation or TeraStation to the list. Enter the IP
address of the LinkStation/TeraStation and click [Add].
Note: Only devices with active backup shares can be registered.
