Buffalo LinkStation LS-CHL User Manual Download Page 85

Page: 85 / 214

Using your LinkStation

LinkStation User Manual

Setting up the backup destination folder on LinkStation # 1

You may configure a destination folder on a LinkStation for backup jobs from a TeraStation or

another LinkStation.

Click the shared folder you want to set as a

backup destination.

In the Web Admin interface, click on [Shared

Folders].

Check [Disk Backup].

Note:

If you enter a backup password, users of other

LinkStations (and TeraStations) will have to enter

the password before using this LinkStation as a

backup destination.

Click [Save].

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands