Buffalo LinkStation LS-CHL User Manual Download Page 35

Page: 35 / 214

Using your LinkStation

LinkStation User Manual

To open the Web Admin interface from a different computer, open a browser and type the

LinkStation’s IP address into the URL field.

With a Mac, you can open the Web Admin interface from Bonjour as described below.

Launch Safari.

Select [View] - [View Bookmark Bar] from Safari’s menu.

Enter your username and password.

Click [Login].

Note:

To log in as a guest, enter "guest" as the

username and leave the password blank.

Select [Bonjour] from the left-side menu, then

click on your LinkStation in the bookmark list.

The Web Admin interface opens.

The LinkStation’s name, IP address and drive

information are displayed on the left.

Summary of Contents for LinkStation LS-CHL























































































































































































































Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands

Buffalo LinkStation LS-CHL, User Manual

Search results

Summary of Contents for LinkStation LS-CHL

Reviews:

Related manuals for LinkStation LS-CHL

Brands by name

Popular brands