Brunswick GS-X Series, Operation & Service Manual

Page: 251 / 302

Section Rev. February 2009
Section 7: Preventative Maintenance
7-5
MATERIALS REQUIRED FOR PREVENTIVE MAINTENANCE
- Metric tool set
- Vacuum cleaner - tank style
- Small paint brush for applying grease
- Cleaning cloths
- Bucket and scrubbing brush (and/or a scrubbing mop)
- Oil can with long rigid or flexible spout
- Lubricating oil (30 weight non-detergent)
- Lubricating grease - medium duty non-lithium - such as:
Brunswick Part No. 11-676361-000
- General purpose cleaner - a non-residue detergent type such as:
Brunswick GPC Part No. 62-860085-005 (5 gallon container)
- Brunswick Pinsetter Cleaner - Part No. 62-860083-005 (5 gallon container)
- Chain Lubricant
SUB-ASSEMBLY PREVENTIVE MAINTENANCE INSPECTION
Elevator Assembly
1. Inspect condition of the frame and frame welds. Check for loose or missing hardware.
2. Inspect all shafts, bearings, sprockets, chains and pulleys for condition and adjustment. Check
all pin shovels and shovel hardware. Inspect all shovel pivot levers.
3. Inspect condition and mounting of guards and verify guard identification labels are in place.
4. Inspect the mounting and adjustment of the elevator control, (EC) switch, as well as the
mounting and function of Mechanic’s rear control box or remote display, and trouble light.
Verify that all elevator cables are intact and routed correctly.
5. Inspect the mounting hardware, condition and adjustment of the shark assembly and pin guide
wedges. Check the shovel cam for adjustment and condition. Check the alignment and mesh of
the drive gears. Inspect the condition and operation of the shark fin. Inspect the tensioning and
condition of the transfer belts. Inspect the mounting hardware and condition of the deflector
shoe.
6. Inspect the condition, alignment, adjustment and operation of the pin count switch.
7. Check the smart shark solenoid and solenoid linkage. Check for proper operation of the smart
shark. Check all mounting hardware and fasteners.