Section Rev. February 2009
Section 1: Operations
1
-
27
Once the sweep is down in the guarding position, the sweep motor turns the sweep shaft clockwise.
This rotates the sweep crank arms to drive the sweep shaft rearward then forward. Six guide rollers
mounted on the sweep wagon, ensure that the wagon rolls smoothly and squarely in its sweep path.
When the cam on the right side crank arm activates the Sweep Motor (SM) switch, the sweep motor
shuts off and its internal brake engages to prevent the motor from coasting. This allows the sweep to be
stopped exactly at the fully forward position. Refer to
Figure 1-26
.
Figure 1-26. SM Switch Closed - Sweep Forward.
(1) “SM” SWITCH
(2) SWEEP SHAFT
(3) CAM
(4) SWEEP DRIVE SHAFT
(5) RIGHT SIDE OF PINSETTER (6) TABLE CRANK ARM
Near the end of the pinsetter cycle, the table motor and sweep release assembly work together with a
pivot link to raise the sweep. During a pinsetter cycle, the table motor runs twice. The first time it
runs counterclockwise. During this time it will be unable to raise the sweep, because of the angle of
the release chain and sweep release assembly created by the pivot link prohibits the release assembly
from “grabbing” the sweep. During the second half of a cycle, the table motor will run clockwise. This
rotation positions the tipper on the sweep release arm under the the sweep wagon, raising the sweep
along with the table.
Summary of Contents for GS-X Series
