Brunswick GS-X Series, Operation & Service Manual

Page: 197 / 302

Section Rev. February 2017
Section 5: Adjustments 5-23
SETTING TABLE LEVELNESS ADJUSTMENT
The setting table must be level in order for pins to be loaded and set properly.
1. With the table at home position check the front, back and side to side position of the table tube
using a level. Refer to Figure 5-26 . If adjustment is needed, loosen the 24 mm hex nuts on the
setting table studs. Refer to
Figure 5-27
. Adjust the roller guides and bearing block as needed to
obtain a level tube guide.
(1)
LEVEL
(2)
TABLE GUIDE
(3)
TUBE
GUIDE
(4)
ROLLER GUIDE
Figure 5-26. Table Rack Guide Rollers.
(1) LEVEL (2) TABLE GUIDE (3) TUBE GUIDE
(4) ROLLER GUIDE