10
Safety Section
Section Rev. February 2017
15. Fire extinguishers must be on hand and maintained properly. Keep oily rags and other
combustibles in approved fire proof containers.
16. If more than one person is working on a machine, be sure the other person is CLEAR before
restarting the machine.
17. When working in the pinsetter area while machines are in operation, ear protection should
be worn. Sound levels greater than 83db can be experienced within 1.6 meters of operating
machines.
18. Never remove the V-belt from the setting table motor without first lowering the table to the new
pin setting position (pindeck).
19. Never work on or around the pinsetter while under the influence of alcohol, drugs, or any other
substance that can impair your physical abilities or mental judgment.
20. Always use the correct tools for the job.
21. The GS-Series pinsetter is designed for use as a 10 pin bowling machine. Do not use the
machine or any of its subassemblies for any other purpose.
22. Poisonous or toxic cleaners must not be used. Always check the material safety data sheets
before using new cleaners.
23. Always use factory approved parts when repairing the pinsetter. Using substandard parts may
pose a safety risk.
24. Always make sure that a bowler is not positioned to throw a ball before putting yourself
between the bowler and the machine. It is good practice to have another employee positioned
near any bowler to ensure they cannot throw a ball and/or place a sign on the approach to
indicate the lane is not available for bowling.
Summary of Contents for GS-X Series
