Section Rev. February 2017
Section 3: Nexgen Electronics
3-31
Foul Detect
The foul detect is located at the foul line and is mounted between the pair of lanes on the ball return
capping. Reflectors mounted on division return the beam to the foul detect. If a foot or some other
object interrupts this beam a signal is sent to the Pinsetter CPU to make the pinsetter set ten new pins if
the machine is in a first ball foul situation while bowling a ten pin game format. The foul detect will not
register a foul when the beam is broken by a bowling ball because the ball does not break the beam for a
long enough duration.
Reset Button
A bowler’s reset button is located on the side of the ball rack. This switch parallels the reset switch on
the Nexgen Controller box and rear Control Box on the elevator. Its purpose is to cycle the pinsetter to
the next ball.
Safety Power Controllers
The Safety Power Controller is installed with pinsetters equipped with the advanced guarding package.
The controller interfaces the masking unit and rear door interlock switches and the safety photo sensor
and in turn controls the 3 phase power to the Nexgen box. There are three versions of the Safety
Controller. Version I and II both incorporate a SICK controller while version III uses a PILZ controller.
Safety Power Controller (Version I and II)
Figure 3-13. Safety Power Controller - Version I and II
Summary of Contents for GS-X Series
