PILOT
ORIFICE
Kit W175-0736, Natural Gas to Propane Includes;
1 REGULATOR
1
#60 BURNER ORIFICE (FRONT)
1
#57 BURNER ORIFICE (REAR)
1
A730-1414 PILOT ORIFICE (P)
1
CONVERSION DATA LABEL
FUEL CONVERSION KIT FOR MODELS
(C)D42 / (C)DX42
These kits are for use at altitudes of 0 to 4500 feet.
INSTALLER: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOME OWNER.
CHECK THE BOXES TO INDICATE THAT THE CORRESPONDING STEPS HAVE BEEN COMPLETED.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
1.
Remove safety barrier, door, and logs from
appliance.
2.
Remove the eight (8) screws securing the burners
in place and the two (2) screws securing the grate in
place
(Fig. 1)
.
3.
Slide burners to the right. Care must be taken to
ensure the air shutter rods are attached.
4.
Using a deep socket, remove the main burner
orifices. Replace with the orifices supplied.
5.
Remove the two (2) screws securing the pilot in
place
(Fig. 1)
. Using a backup wrench, remove the
pilot tube from the bottomside of the pilot
(Fig. 2)
.
Remove the pilot orifice and replace with the one
supplied. Reattach the pilot tube and pilot to the
bracket.
6.
Replace and re-secure the burner assemblies,
ensuring that the venturi fits over the burner orifices
and the air shutter rods are secured and sealed.
7.
To convert the main valve, follow the instructions that are supplied with
the regulator assembly kit.
8.
The conversion data label must be filled out and attached adjacent to
the valve.
9.
Turn on the gas supply and check for gas leaks by brushing on a soap
and water solution.
Do not use open flame.
10.
Replace the media. Then light the pilot and main burner to ensure that
the gas lines have been purged.
11.
Re-secure the door. Turn on the electrical supply to the appliance.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this
appliance may result in property damage or personal injury.
CAUTION: Before proceeding with conversion, shut off gas supply and disconnect electrical power.
Kit W175-0734, Natural Gas to Propane Includes;
1 REGULATOR
1
#57 BURNER ORIFICE (FRONT)
1
#56 BURNER ORIFICE (REAR)
1
A730-1414 PILOT ORIFICE (P)
1
CONVERSION DATA LABEL
Kit W175-0735, Propane to Natural Gas Includes;
1 REGULATOR
1
#53 BURNER ORIFICE (FRONT)
1
#44 BURNER ORIFICE (REAR)
1
A730-2023 PILOT ORIFICE (NG)
1
CONVERSION DATA LABEL
Fig. 1
Purge all gas lines with the glass door open.
Assure that a continuous flow is at the burner before closing the door.
W415-2942 / A / 09.09.20
Kit W175-0737, Propane to Natural Gas Includes;
1 REGULATOR
1
#52 BURNER ORIFICE (FRONT)
1
#49 BURNER ORIFICE (REAR)
1
A730-2023 PILOT ORIFICE (NG)
1
CONVERSION DATA LABEL
(C)DX42
(C)D42
(C)D42
!
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable
codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire,
explosion, or production of carbon monoxide may result causing property damage, personal injury, or loss of life. The qualified
service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the
converted appliance is checked as specified in the owner’s instructions suppled with this kit.
(C)DX42
Fig. 2
Grate
Pilot
Burners
