manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Administrator'S Manual

The Brocade Communications Systems 53-1001763-02 Administrator's Manual is a comprehensive guide for operating and managing this product. Easily download this manual for free from our website, manualshive.com, and gain in-depth knowledge on maximizing the potential of your Brocade Communications Systems device.

Share
Download
background image

xiv

Fabric OS Administrator’s Guide

53-1001763-02

Zoning configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

Creating a zoning configuration  . . . . . . . . . . . . . . . . . . . . . . . .254
Adding zones (members) to a zoning configuration  . . . . . . . .254
Removing zones (members) from a zone configuration . . . . .255
Enabling a zone configuration  . . . . . . . . . . . . . . . . . . . . . . . . .255
Disabling a zone configuration . . . . . . . . . . . . . . . . . . . . . . . . .256
Deleting a zone configuration . . . . . . . . . . . . . . . . . . . . . . . . . .256
Clearing changes to a configuration. . . . . . . . . . . . . . . . . . . . .257
Viewing all zone configuration information  . . . . . . . . . . . . . . .257
Viewing selected zone configuration information . . . . . . . . . .258
Viewing the configuration in the effective zone database  . . .258
Clearing all zone configurations . . . . . . . . . . . . . . . . . . . . . . . .258

Zone object maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

Copying a zone object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
Deleting a zone object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
Renaming a zone object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

Zoning configuration management . . . . . . . . . . . . . . . . . . . . . . . . .261

New switch or fabric additions . . . . . . . . . . . . . . . . . . . . . . . . .261
Fabric segmentation and zoning. . . . . . . . . . . . . . . . . . . . . . . .263

Security and zoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263

Zone merging scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

Chapter 12

Traffic Isolation Zoning

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

Traffic Isolation Zoning overview . . . . . . . . . . . . . . . . . . . . . . . . . . .267

TI zone failover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268
FSPF routing rules and traffic isolation  . . . . . . . . . . . . . . . . . .270

Enhanced TI zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

Traffic Isolation Zoning over FC routers . . . . . . . . . . . . . . . . . . . . . .273

TI within an edge fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
TI within a backbone fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . .275
Limitations of TI zones over FC routers  . . . . . . . . . . . . . . . . . . 276

General rules for TI zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276

Supported configurations for Traffic Isolation Zoning  . . . . . . . . . .277

Additional configuration rules for enhanced TI zones . . . . . . .278
Trunking with TI zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278

Limitations and restrictions of Traffic Isolation Zoning  . . . . . . . . .278

Admin Domain considerations for Traffic Isolation Zoning  . . . . . .279

Virtual Fabric considerations for Traffic Isolation Zoning. . . . . . . .279

Traffic Isolation Zoning over FC routers with Virtual Fabrics  . . . . .281

Creating a TI zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

Creating a TI zone in a base fabric . . . . . . . . . . . . . . . . . . . . . .284

Modifying TI zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

Changing the state of a TI zone . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

Summary of Contents for 53-1001763-02











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 53-1001763-02

Yamaha DM 1000 Manual preview
DM 1000
Brand: Yamaha Pages: 30
Xerox DocuColor 45054549 User Addendum preview
DocuColor 45054549
Brand: Xerox Pages: 30
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Brand: Better Edge technology Pages: 121
CenturyLink Prism TV Quick User Manual preview
Prism TV
Brand: CenturyLink Pages: 24
Red Hat CERTIFICATE SYSTEM 8 - DEPLOYMENT Install Manual preview
CERTIFICATE SYSTEM 8 - DEPLOYMENT
Brand: Red Hat Pages: 132
FieldServer FS-8700-115 Instruction Manual preview
FS-8700-115
Brand: FieldServer Pages: 15
Oracle Application Server 10.1.3.4 User Manual preview
Application Server 10.1.3.4
Brand: Oracle Pages: 170
IBC BoilerNet Interface Controller II User Manual preview
BoilerNet Interface Controller II
Brand: IBC Pages: 52
Xerox 6100BD - Phaser Color Laser Printer User Manual preview
6100BD - Phaser Color Laser Printer
Brand: Xerox Pages: 56
Rane SIXTY-EIGHT Quick Start Manual preview
SIXTY-EIGHT
Brand: Rane Pages: 8
FieldServer FS-8704-12 Manual preview
FS-8704-12
Brand: FieldServer Pages: 26
ACRONIS BACKUP AND RECOVERY 10 - DEDUPLICATION Datasheet preview
BACKUP AND RECOVERY 10 - DEDUPLICATION
Brand: ACRONIS Pages: 2
Infinity Softworks PEG-N610C gMovie v1.3 Operating Instructions Manual preview
PEG-N610C gMovie v1.3
Brand: Infinity Softworks Pages: 29
AMX AXD-CP4/A Instruction Manual preview
AXD-CP4/A
Brand: AMX Pages: 84
Garmin Pilot User's iOS User Manual preview
Pilot User's iOS
Brand: Garmin Pages: 178
Oki OF5650 User Manual preview
OF5650
Brand: Oki Pages: 69
Autodesk 057A1-05A111-1001 - AutoCAD LT 2009 Getting Started Manual preview
057A1-05A111-1001 - AutoCAD LT 2009
Brand: Autodesk Pages: 184
Revox Joy App S232 User Manual preview
Joy App S232
Brand: Revox Pages: 23

Brands by name

Popular brands

Load more brands