install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
7.16.3
2.
A scene change is a memory setting inside
the audio mixer that can recall virtually any
combination of settings. For example a
scene change could recall a reverb effect
and turn on fader 3. You need to first create
and save your memories/scenes from your
audio mixer, refer to your mixer’s manual on
how to save a scene change.
To recall a scene change (either 0-99)
simply type the
number
of the scene
change in the On-Air or Off-Air column of the
source, as shown on the right.
Only one scene change is allowed per
source.
3.
You may also ‘Tie’ one or more video
sources together. When a source is tied to
other sources, the on-air command is
executed for all the sources but the
command goes off-air only when all the tied
sources are off air.
For example, if you had an interview with 2
cameras and 1 microphone, you
could have both camera sources tied to
each other so when you transition
between the 2 angles the audio does not
go off air. The audio would go off air
when a different source is transitioned to
Program.
To tie a video source to another video
source, simply type:
t
and the
number
of
the other source (i.e. t1), as shown on the
right.
When one column is set to be tied, the
other column will automatically get tied as
well.
