install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
5.5.3
Motion Controls for an Animation:
1.
Assign the Device Controls to an Animations
(Anim) channel, select the
[Anim 1]
or
[Anim 2]
button, it will illuminate orange, as
shown on the right.
2.
The display will show the 3 scrubbing
speeds, as well as the timecode.
To scrub the animation forward or back, turn
the
[1
st
Knob]
in the motion controls section,
as shown on the right.
3.
To start playing the animation, press the
[>]
motion control button, and it will illuminate
orange. The counter will also begin to
countdown.
4.
To stop/pause an animation, press the
[>]
motion control button again and the light will
turn off.
5.
To rewind the animation to the beginning,
press the
[|<<]
motion control.
6.
To jump to the end of the animation, press
the
[>>|]
motion control.
NOTE:
If you want audio to play at the same time as your animation, then create a .wav file of the same
name as the animation and store it in the same location as the animation file on the C drive,
(for example alphawipe00001.tga and alphawipe.wav). If the file name as an _ at the end of the file name, it
too must be deleted (for example alphawipe_00001.tga and alphawipe.wav).
The .wav file needs to be PCM Data 16 bit at 48 kHz.