install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
4.11.8 Remote Panel Setup
Each Remote Panel can be setup with up to 22 modes, which allow and/or restrict the
ability to assign inputs and/or outputs. In addition, different Macros or SnapShot
memories are assignable to each mode. This setup is done in PixMaster Show Editor and
every setting is show-based, meaning that all the settings are saved and recalled on a
show by show basis.
To Setup the Remote Panels:
1.
Launch BPswitcher and load a show,
as described in section 1.6.
2.
Click on the Broadcast Pix Menu and
select
File, Edit Show…
, as shown on
the right.
3.
In the PixMaster window, select the
Remote Panels
button, as shown on the right.
This will open the Remote Panel Setup
window, as shown below.
4.11.8
Mode
Selection
Granite
Switcher
Inputs
Granite
Switcher
Outputs
Memory
Assignment