install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
1.10.3
1.10.3 Changing the Output Settings
The Granite Switcher is a multi-definition switcher allowing for both SD and HD
signals to be mixed and outputted. If SD sources are being used, a details option is
also available to enhance the SD outputs. SD filtering applies a very light filter to all
the SD outputs. Checking it on is meant for HD sources outputting to SD to eliminate
aliasing. No check preserves the most detail of an SD source. When this option is
enabled all HD content (video and graphics) may show additional artifacts. This
setting does not affect the HD outputs.
To enable SD filtering:
1.
In BPswitcher, click on
Setup
and a
drop down window will appear, then select
System Settings…
as shown on the right.
The System Settings window will appear,
as shown below.
2.
In System Settings window, click on the
Video
Tab, which will bring up the
various video settings.
3.
Place a check mark next to the
SD filtering
option.
4.
Click on the
OK
button.
This will close the System Settings window.