install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
6.2 Clip Motion Controls
The motion controls provide a range of control over a selected clip.
1.
To play a clip press
[>]
, and it will illuminate orange
2.
To pause a clip that is playing, press the
[>]
button again.
3.
When a clip is paused, pressing the
[>]
button will start it playing again.
4.
To return to the beginning of the clip press the
[l<<]
button.
5.
To jump to the end of the clip, press the
[>>|]
motion control.
6.2.1 Clip Counter
The runtime of the clip is displayed in lower right corner of the display either on the
Control Panel or SoftPanel.
When a clip is playing the timecode shows hours, minutes and seconds.
When the clip is stopped, the time code also displays the frame, as shown below.
The clip’s runtime is also shown on the Multi-View, and clips can be set to count up or
count down, see section 2.5.6
6.2
Hours : Minutes : Seconds : Frames
