install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
To advance the audio output:
1.
In BPswitcher, click on
Setup
and a
drop down window will appear, then select
System Settings…
as shown on the right.
The System Settings window will appear,
as shown on the bottom right.
2.
In System Settings window, click on the
Audio
Tab, which will bring up the
various audio settings.
3.
In the Clip audio advance text box,
enter a
number
from 0 to 15 frames.
The number entered will advance both the
Clip Store and Animation Store. Normally
this number will be any where from 0 to 3
frames depending on how the video and audio
is delayed.
An application restart is necessary for this
setting to take affect.
4.
Click on the
OK
button.
This will close the System Settings window.
To de-emphasis the audio output:
1.
In the System Settings menu, select the
Audio
tab.
2.
Under the Audio Options section, place a
check-mark next the
De-Emphasis.
Now all high frequency audio will be rolled off
from the output, this is the default setting. To
allow for higher frequencies, for a larger range
of audio deselect this option.
1.5.1
