install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
4.2.2 Background Cut Transition
A cut is a ‘hard’ transition that instantaneously switches from one video picture to
another.
To perform a cut:
1.
The background transition button must be on and illuminated. If it is not
already on, press
[Bgr]
and it will illuminate orange.
2.
On the preview bus, select the source you wish to transition to by pressing its
button. The button will light orange and the selected source is displayed in the
preview monitor. In this example input 2 labeled “Cam 2” is on preview and
input 1 labeled “Cam 1” is on program.
3.
Press the
[Cut]
transition button. This will bring the selected source to
program, and whatever was on program to the preview monitor. The
illuminated buttons will also “flip-flop” in the program and preview rows, as
shown:
4.2.2