install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
8.
To set a roll or crawl to continuously loop, press the
[Loop CG OnOff]
PixButton on the CG Modifier PixPad. The letter (L) will be added to the
modifiers in the display to let you know that it has been set to loop.
9.
On of the most powerful modifiers for rolls an crawls is auto-start. This sets
the roll or crawl to auto-start when taken to air, rather than starting it manually
with the [>] button. To set a CG graphic to auto-start, press the
[Auto Start
OnOff]
PixButton on the CG Modifier PixPad. The letter (A) will be added to
the modifiers in the display to let you know that it has been set to auto-start.
10.
To change the speed of a roll or a crawl, turn the middle knob marked
Sp
(Speed), as shown below. The speed in pages per second will appear
above the knob. This illustration also shows a CG graphic with many
modifiers set. To make a roll/crawl run faster turn the knob to the right, to
make it run slower turn it to the left.
You can dynamically change the speed on a roll/crawl any time, giving you
greater flexibility for your roll/crawls.
11.
For international languages that read right to left, the
[Direction]
PixButton
may be used to change the read direction. Only crawls may have their
direction changed. The default state of the text read direction is to the left,
meaning the crawl comes in from the left and the display shows Lt. Changing
the direction will also change the display to Rt, to represent that the crawl is
coming in from the right, as shown below.
5.3.4
NOTE:
When playing a Roll or a Crawl, Broadcast Pix does not auto-detect if the CG is a Roll or Crawl, it
will always default to C for Crawl. It will be necessary to manually change your files accordingly.
CG: Credits (RBELA)
Sp: 3.1
0:00:00
CG: Crawl (CBELA-Rt)
Sp: 3.1
0:00:00
