install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
To Change the Server IP Address:
1.
On the Remote Panel, select and hold down the
[Shift]
button, it will illuminate
yellow. Then select the
[Lock]
button.
2.
This will put the Remote Panel into an offline setup mode, as shown below.
3.
Press the
[3]
input PixButton labeled
Set Svr IP
, and the PixButtons will change
showing the assigned IP address of the Server. It is important that the IP address of
the Granite Server and this setup menu match. On most installations this step is not
necessary.
4.
Press the input PixButtons to enter the desired address. The numbers will cycle
from 0 to 9.
5.
Select the
[Output]
PixButton labeled
Set Server IP
to apply and exit out of the
setup function.
6.
Click on the
[Output]
PixButton labeled
Join The Show
to connect to a running
show.
To Change the Button Contrast:
1.
On the Remote Panel, select and hold down the
[Shift]
button, it will illuminate
yellow. Then select the
[Lock]
button.
2.
This will put the Remote Panel into an offline setup mode, as shown below.
3.
Press the
[4]
input PixButton labeled
Set Black
, and the PixButtons will change
showing black squares in green, orange and red buttons. Use these buttons as a
reference for legibility.
4.
Press the
[Lock]
button to increase the contrast.
5.
Press the
[Macro]
button to decrease the contrast.
6.
Press the
[Output]
PixButton labeled
Set Black
to apply the changes and to return
to the setup menu.
4.11.7
Set Panel Set Set Code Light Test Panel
Join
Mode IP Svr IP Black Ver Show Pix Setup Shift The
Show
Set Panel Set Set Code Light Test Panel
Join
Mode IP Svr IP Black Ver Show Pix Setup Shift The
Show