Blue Bird M380 2003, Owner'S Manual

Page: 76 / 579

2-2 – Instruments and Controls - Driver and Co-Pilots Area________________________________M380 Owner’s Manual
2-2-4 Rev. “F”
Additionally, if the fleet owner purchases INFORM™ or INSPEC™ software, many other types of
stored information such as trip data, route data, fuel purchases, and much more can be extracted and
presented in easy-to-read reports. RoadRelay 4 configurations and calibrations are changed with the
office software.
2-2.9.2 Getting Started
When first using the RoadRelay 4, reading a few sections of this manual will allow you to start using
the product quickly. The recommended sections are
Using the Keypad, Selecting a Language, Using
the Clock, and Units of Measure . Scan the rest of the sections to find other sections that explain
features you wish to use.
2-2.9.3 Using the Keypad
Related sections: Leg Information - Automatic Leg Screens .
NOTE: All examples will start from an AUTO LEG screen. See the Leg Information section to
view these screens. To reach an AUTO LEG screen, keep pressing until the screen stays
the same.
The RoadRelay 4 has a backlit keypad that is used to move through the different screens and to enter
data. A picture of each key and its name is shown below.
NOTE: The RoadRelay 4 will automatically power down 30 seconds after the keyswitch is
turned off. The RoadRelay 4 may be powered by pressing the ENTER key. As long as any key
is pressed within 30 seconds, the RoadRelay 4 will remain powered.
2-2.9.3.1 Menu Screens
Menu screens can be identified by the presence of a SELECTOR (<=) on the right side of the screen.
When in a menu, use and to move the SELECTOR up or down in a list. and will
automatically repeat if held down. If you reach the top or bottom of a menu, it will “wrap around” to the
other end of the menu. To select an item, move the SELECTOR to the right side of the desired item
and press
.