Blue Bird M380 2003, Owner'S Manual

Page: 57 / 579

M380 Owner’s Manual____________________________________________Safety and Security - Security Features – 1-2
Rev. “F” 1-2-25
Programming Automatic Rearming:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released fifteen times. The system’s response will be fifteen siren chirps, and the Status
Light flashing fifteen times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to turn on the Automatic Rearming feature (the siren will chirp once)
or the small lower button to turn the Automatic Rearming feature off (the siren will chirp twice).
Feature #16 Doors Lock with Automatic Rearm
(Factory Default Setting On)
This feature adds the automatic locking of the doors to the previous feature, Automatic Rearming. If
this feature is turned on, the doors will lock when the system rearms itself 90 seconds after being
disarmed by the transmitter. Feature #15 must be turned on for this feature to operate.
Programming Door Locks with Automatic Rearming:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released sixteen times. The system’s response will be sixteen siren chirps, and the
Status Light flashing sixteen times, pausing, then repeating. Within 10 seconds, press and release
the transmitter’s large upper button to turn this feature on (the siren will chirp once) or the small lower
button to turn this feature off (the siren will chirp twice).
Feature #17 3/45 Second Arming Delay
(Factory Default Setting 3 Second )
This feature determines how long after the Arming confirmation chirp that the system becomes fully
med. The Arming Delay applies to the system Arming regardless if it occurs from using the
transmitter, Last Door Arming or Automatic Rearming.
Programming 3/45 Second Arming Delay:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released seventeen times. The system’s response will be seventeen siren chirps, and
the Status Light flashing seventeen times, pausing, then repeating. Within 10 seconds, press and
release the transmitter’s large upper button to configure the system with a 3 second Arming Delay
(the siren will chirp once) or the small lower button to configure the system with a 45 second Arming
Delay (the siren will chirp twice).
Feature #18
Door Locks When Ignition Is Turned On
(Factory Default Setting On)
This feature configures the system to automatically lock the vehicle’s doors every time that the
ignition switch is turned on. An exception to this would be if feature #21 is turned on, and a door being
open when the ignition switch is turned on. The two following features, #19 and #20 control the
automatic unlocking operation.
Programming Door Locks When Ignition is Turned On:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released eighteen times. The system’s response will be eighteen siren chirps, and the
Status Light flashing eighteen times, pausing, then repeating. Within 10 seconds, press and release
the transmitter’s large upper button to turn on “Door Locks When Ignition Turned On” (the siren will
chirp once) or the small lower cotton to turn this feature off (the siren will chirp twice).
Feature #19 Unlock #1 When Ignition is Turned Off
(Factory Default Setting On)
This feature configures the system to automatically unlock the vehicle’s doors every time that the
ignition switch is turned off. An exception to this would be if feature #21 is turned on, and a door being
open when the ignition switch is turned off. If the system is installed without the Driver’s Door Priority
unlock interface, this feature unlocks all of the doors when the ignition switch is turned off. If Driver’s