Blue Bird M380 2003, Owner'S Manual

Page: 110 / 579

2-2 – Instruments and Controls - Driver and Co-Pilots Area________________________________M380 Owner’s Manual
2-2-38 Rev. “F”
2-2.14 Printing to Hyperterminal
Hyperterminal is a program included with the Windows™ operating system. It is a communications
program that will allow you to download the RoadRelay information to your PC using an extraction
harness and serial cable. You can then generate printed reports of the RoadRelay 4 data using the
downloaded electronic files.
To connect the RoadRelay 4 to the PC, you will need a RoadRelay extraction harness (Cummins Part
Number 4003775) and a serial cable to connect to your PC. The extraction harness has a female,
9-pin DB connector. You
must acquire the extraction harness and serial cable elsewhere. They are
not included with the RoadRelay 4 unit.
To launch Hyperterminal:
1. Select Start|Programs|Accessories|Hyperterminal|HyperTerminal.
2. The program will ask for a name. Enter the desired file name.
3. You will then be asked to select a serial port to which to connect. Choose the appropriate
port.
4. Then set the port settings as follows:
9600 Bits per second; 8 Data bits, Parity None; Stop bits 1; and Flow control None.
After connecting the cables and starting Hyperterminal, you can copy the data from the RoadRelay 4
to your PC. The output will appear in the Hyperterminal window. Save the file by selecting File|Save
As; then name the file appropriately to its contents; for example. “RR4data.txt.”
2-2.15 Environmental Information
The RoadRelay 4 is designed to operate within a temperature range of -40° to 85°C [-40° to 185°F].
It will operate from a voltage supply of 7.5 to 40 VDC.
2-2.16 Cleaning the RoadRelay 4
Do not use petroleum-based solvents or cleaners. Do not use abrasive cleansers or materials on the
faceplate. They can cause scratches.
Most standard household cleaners are suitable for use on the RoadRelay 4.
2-2.17 Troubleshooting and Technical Support
Related sections: Software Version .
Always check all wiring to the RoadRelay 4 if you are having problems. Do not open the RoadRelay
4. Doing so will void any warranty you may have. The RoadRelay 4 has no user-serviceable parts.
If you believe the unit is properly wired and still not working, call Technical Support at 1-800-433-9341
in the USA and Canada, 0 800-286646 in the UK, +1-812-377-8136 for international calls.
To make your call go as smoothly as possible, please have the following information handy when you
call:
•
Make and model of the vehicle in which the RoadRelay 4 is installed.
•
Engine type (for example, ’91 Cummins N14)
•
Software version of your RoadRelay 4
•
Transmission type
•
Any electronic systems on the vehicle (for example, ABS).