Blue Bird M380 2003, Owner'S Manual

Page: 54 / 579

1-1 - Safety and Security - Security Features____________________________________________M380 Owner’s Manual
1-2-22 Rev. “F”
Feature #3 Chirp Confirmation
(Factory Default Setting On)
This feature allows the permanent removal of the system’s chirping the siren as an audible
confirmation when performing functions such as Arming and Disarming. Please note that utilizing this
feature to remove the confirmation chirps does not effect siren chirping operations associated with the
ATV Warning, sensor prewarning or Programming Mode.
Changing Chirp Confirmation:
Follow Steps 1 through 4 in the section for Programming the 745i ³; at Step 4 the Valet Switch will be
pressed and released three times. The system’s response will be three siren chirps, and the Status
Light flashing three times, pausing, then repeating. Within 10 sections, press and release the
transmitter’s large upper button to turn the Chirp Confirmation on (the siren will chirp once) or the
small lower button to turn the Chirp Confirmation off (the siren will chirp twice).
Feature #4 30 or 60 Section Alarm Duration
(Factory Default Setting 30 Seconds)
This feature allows the option of a 30 or 60 second Alarm Duration, which is when the system has
activated in Armed state, sounding the siren and flashing the parking lights.
Changing the Alarm Duration:
Follow Steps 1 through 4 in the section for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released four times. The system’s response will be four siren chirps, and the Status
Light flashing four times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to set the Alarm Duration for 30 seconds (the siren will chirp once) or
the small lower button to set the Alarm Duration for 60 seconds (the siren will chirp twice)
Feature #5
Automatic Sensor Zone Bypass
(Factory Default Setting On)
This feature configures the system to automatically bypass the sensor protection zone if the sensor
should be triggered five times during a single Armed state. If the sensor is bypassed, it will be
reinstated the next time the system becomes Armed.
Programming Automatic Sensor Zone Bypass:
Follow Steps 1 through 4 in the section for Programming the 745i ³; at Step 4 the Valet Switch will be
pressed and released five times. The system’s response will be five siren chirps, and the Status Light
flashing five times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s
large upper button to turn the Automatic Sensor Zone Bypass feature on (the siren will chirp once) or
the small lower button to turn this feature off (the siren will chirp twice).
Feature #6 Auxiliary Output #2 Also Disarms System
(Factory Default Setting On)
This feature configures the Auxiliary Output #2 to automatically Disarm the system at the same when
it is used.
Programming Auxiliary Channel #2 Disarms System:
Follow Steps 1 through 4 in the section for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released six times. The system’s response will be six siren chirps, and the Status Light
flashing six times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s
large upper button to have the system Disarm when Auxiliary Output #2 is used (the siren will chirp
once) or the small lower button to have Auxiliary Output #2 not Disarm the system when it is used
(the siren will chirp twice).
Feature #7 Last Door Arming
(Factory Default Setting On)
This feature configures the system to automatically Arm itself 30 seconds after the vehicle’s last door
is closed.