Blue Bird M380 2003, Owner'S Manual

Page: 55 / 579

M380 Owner’s Manual____________________________________________Safety and Security - Security Features – 1-2
Rev. “F” 1-2-23
Programming Last Door Arming:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released seven times. The system’s response will be seven siren chirps, and the Status
Light flashing seven times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to turn on Last Door Arming (the siren will chirp once) or the small
lower button to turn off Last Door Arming (the siren will chirp twice).
Feature #8
Doors Lock with Last Door Arming
(Factory Default Setting Off)
This feature adds the automatic locking of the doors to the previous feature, Last Door Arming. If this
feature is turned on, the doors will lock when the system becomes armed 30 seconds after closing
the last door. Feature #7 must be turned on for this feature to operate.
Programming Door Locks with Last Door Arming:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released eight times. The system’s response will be eight siren chirps, and the Status
Light flashing eight times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to turn on the Door Locks with Last Door Arming feature (the siren will
chirp once) or the small lower button to turn off the feature (the siren will chirp twice).
Feature
#9 Parking Light Illumination Upon Disarm
(Factory Default Setting Off)
This feature configures the system to illuminate the vehicle’s parking and dome lights for 30 seconds
when it is Disarmed. Otherwise, if this feature is turned off, the lights will flash once upon Disarming
the system.
Programming Parking Light Illumination Upon Disarm:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released nine times. The system’s response will be nine siren chirps, and the Status
Light flashing nine times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to have the parking lights turn on for 30 seconds when the system is
Disarmed (the siren will chirp once) or the small lower button to have the parking lights only flash
once when the system is Disarmed (the siren will chirp twice).
Feature #10 Starter Interrupt Operates in Valet Mode
(Factory Default Setting Off)
This feature configures the system to engage the starter interrupt circuit when the remote transmitter
is used to lock the vehicle’s doors while the system is in Valet Mode. When this is done, the
transmitter must be used to unlock the doors or an Emergency Override must be performed to
disengage the starter interrupt.
Programming Starter Interrupt Operates in Valet Mode
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released ten times. The system’s response will be ten siren chirps, and the Status Light
flashing ten times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s
large upper button to turn this feature on (the siren will chirp once) or the small lower button to turn
this feature off (the siren will chirp twice).
Feature #11 Door Lock/Unlock Pulse Duration
(Factory Default Setting .8 Second)
The feature offers the selection of a .8 second or a 3 second pulse duration of the system’s door lock
outputs. Certain vehicles have power door locking systems, which are vacuum operated, and thus
requires a longer output pulse from the Crime Guard System. While use of this feature is determined
by the type of vehicle the system is installed in, this feature does save the owners of such vehicles
the added expense of a special adapter.