background image

4-16 – Interior and Exterior Systems Operation - Appliances______________________________M380 Owner’s Manual 

4-16-22                                                                                                                                                                             Rev. ”G” 

4-16.2.33  Kitchen Timer 

 

Suppose you want to time a 3-minute long distance phone call. 

1.  Touch KITCHEN TIMER pad. 
2.  Enter time, for instance a 3 minute long phone call would be 

300. 

3.  Touch START pad 

 

4-16.2.34  Minute Plus 

 
Minute Plus allows you to cook for a minute at 100% by simply touching 
the 

MINUTE PLUS

 pad. You can also extend cooking time in multiples 

of 1 minute by repeatedly touching the 

MINUTE PLUS

 pad during 

manual cooking using microwave, convection, mix or broil. 
 
Suppose you want to heat a cup of soup for one minute. Simply touch 
the 

MINUTE PLUS 

pad once. 

 

NOTE: 
Touch MINUTE PLUS pad within 1 minute after cooking, closing 
the door, touching the STOP/CLEAR pad or during cooking. Minute 
Plus cannot be used to start the oven if any program is on display.

 

 
Minute Plus cannot be used with 

SPECIAL FEATURES

 

4-16.2.35 Touch On 

 
Touch On allows you to cook at 100% power by touching the 

START/TOUCH ON

 

continuously. Touch On is ideal for melting cheese, bring milk to just below boiling, etc. The 
maximum cooking time is 3 minutes. 
 

Suppose you want to melt cheese on a piece of toast. 

 

1.  Continuously touch START/TOUCH ON pad. The cooking time will begin counting up. 
2.  When the cheese is melted to desired degree, remove finger from START/TOUCH ON 

pad. Oven stops immediately. 

 

NOTE: 

1.  Note time it takes for frequently used foods and program that time in the future. 
2.  Touch TOUCH ON pad within 1 minute after cooking, opening and closing the 

door or touching the STOP/CLEAR pad. 

3. 

Touch On can only be used 3 times in a row. If more times are needed, open and 
close door or touch STOP/CLEAR.

 

 

NOTE: For all Special Features refer to the Manufacturer’s Manual supplied with your 
microwave. 

 

4-16.2.36  Cleaning and Care 

 

Exterior 

The outside surface is precoated metal and plastic. Clean the outside with mild soap and water; 
rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner. 

 
Touch Control Panel 

Care should be taken in cleaning the touch control panel. If the control panel becomes soiled, 
open the oven door to inactivate the control panel before cleaning. Wipe the panel with a cloth 
dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical 
cleaners. Avoid the use of excess water. Close the door and touch 

STOP/CLEAR

Summary of Contents for M380 2003




































































































































































































































































































































































































































































































































































































Reviews: