Blue Bird M380 2003, Owner'S Manual

Page: 99 / 579

M380 Owner’s Manual________________________________Instruments and Controls - Driver and Co-Pilots Area – 2-2
Rev. “F” 2-2-27
2-2.9.21.1 Resetting Trip Data
Press and hold
while looking at a trip screen until the RoadRelay 4
beeps, or press ; select “Reset Trip.” Press to reset; press to
leave this screen and not reset trip.
If the RoadRelay 4 is in “Fleet Mode,” you will not be able to reset the
data. (Fleet mode can only be turned ON or OFF using
INFORM™/INSPEC™ office software.)
2-2.9.21.2 Printing a Trip Report
Connect the printer to the RoadRelay 4. To print a trip report, press
. Select “Print Report.” Press to print. To leave, press .
The printed report will have a header section with the report title,
time of printing, engine serial number, and odometer reading. It will
show all trip-information screens, each separated by a line of
asterisks (*).
2-2.9.21.3 Driver Messages
Driver messages are entered into the RoadRelay 4 using
INFORM™/INSPEC™ office software. To see the messages, press
and select “Driver Messages.”
If there are no messages, you will see the screen at left:
2-2.9.22 Help
Press
. Select the language you prefer. After pressing , the
first “Help” screen will be shown. Use and to review these
screens. To leave, press .