Blue Bird M380 2003, Owner'S Manual

Page: 90 / 579

2-2 – Instruments and Controls - Driver and Co-Pilots Area________________________________M380 Owner’s Manual
2-2-18 Rev. “F”
2-2.9.13 Vehicle Monitor
Related sections: Units of Measure, Pop-up GPS Information . Vehicle monitor shows data presently
being received by the RoadRelay 4 from the datalink.
Press
. Select “Vehicle Monitor.” Use or to move between the screens.
NOTE: Your screens may not show all the data. If the information is not available, either
question marks will be shown or the entire line may be blank.
This screen shows engine rpm, boost pressure, present engine
power, and instantaneous fuel economy. On some engines, “Power”
may be replaced with “Load” and show percent of engine load.
This screen shows coolant temperature, oil pressure, oil temperature and battery voltage.
In this example, the battery voltage is not available from the vehicle
and, therefore, is shown as question marks .
The following screen shows road speed, fuel rate, outside air pressure, and outside air temperature.
The following screen shows the gears selected and requested. The bottom line shows the
temperature of the transmission fluid.
This screen can only be seen on vehicles with automatic
transmissions that send this information to the RoadRelay 4. The
gear values are sent by the transmission and the displayed gears will
vary by transmission manufacturer.
The following screen shows the present driver reward level, road
speed governor limit, and cruise control limit.
This screen can only be seen on vehicles with the Driver Reward feature on.
The following screen shows the accumulated totals for distance
traveled, fuel used, and hours of operation. “ECM” in the first column
indicates the total is from the engine control module. “RR4” indicates
total is from the RoadRelay 4.
The RoadRelay 4 GPS system is optional; the following screen will
only be shown if the RoadRelay 4 has this option.