Blue Bird M380 2003, Owner'S Manual

Page: 47 / 579

M380 Owner’s Manual____________________________________________Safety and Security - Security Features – 1-2
Rev. “F” 1-2-15
Automatic Rearming Notes:
•
Turning the vehicle’s ignition on cancels Automatic Rearming.
•
Opening a door will suspend the 90-second countdown.
•
All protected zones must remain non-violated during the 90 second Automatic Rearming
period. For example, if a vehicle door is opened during the 90-second period, the countdown
will stop. When the door is closed, the system resets and starts a new 90-second countdown
period.
•
The Automatic Rearming sequence is indicated by a fast flashing Status Indicator Light,
unless the system has been activated, in which case an Alarm Condition Memory Recall
code will flash instead. The ignition switch must be turned on to erase Zone Violation Code.
•
If the system is disarmed while it is activated (siren sounding and lights flashing) Safety
Disarm will cancel the Automatic Rearming for that disarming operation only. The next time
the system is armed, Automatic Rearming will be initiated upon the subsequent disarming.
1-2.4.7 Disarming by Emergency Override
Emergency Override:
In the event that your transmitter is lost, damaged, or its batteries have become exhausted, the Valet
Switch and the vehicle’s ignition key may be used to disarm the system. Please note that for this
operation the pressing of the Valet Switch may be customized; this is the SecureCode feature, the
programming of which is described in “Feature #2 745i³ Programmable Features found later in this
manual.
The following Emergency Override instructions reflect the SecureCode entry of the Valet Switch as
the “as received” default setting of “1 press”. Instead of “1 press” of the Valet Switch, a customized
programming of the SecureCode would require from 2 to 12 presses.
To Disarm the System without using a Transmitter:
1. With the system in the armed condition, enter the vehicle via the driver’s door (be aware that the
system will activate an alarm condition when the door is opened).
2. Using the ignition key, turn the vehicle’s ignition on.
3. Within 5 seconds, enter the SecureCode by pressing and releasing the Valet Switch once. The
system will disarm.
If the SecureCode entry of the Valet Switch is the “as received” default setting of “1 press”, the
system will disarm the moment the Valet Switch is released from the single press. If a customized
SecureCode has been programmed, the system will disarm a few seconds after the correct entry. If
an incorrect entry is made, the system will not disarm.
A procedure, which is separate, but similar, to an Emergency Override, is the
Easy Valet Mode , which
prevents the system from performing any automatic arming operations, which may be programmed to
occur. See section “
Easy Valet Mode ” later in this manual.
1-2.4.8 Remote Panic
To Activate Panic:
Press and hold the large upper button for 3
seconds.
To Deactivate Panic :
Press and release the large upper button.
Upon Activating Panic:
•
The electronic siren will sound.
•
The vehicle’s exterior parking lights will flash.
•
The vehicle’s doors will unlock*
- The Panic feature is designed for situations in which the user feels threatened and/or a
need to attract attention.
-
Panic can be activated anytime, whether the vehicle’s ignition is turned on or off, and has
a 30 second duration (60 seconds is optional) unless it is deactivated using the remote
control.